The Process Works in 3 Basic Steps
Step 1:
Careful preparation ensures that the area requiring repair is free from contaminants to ensure that the repair can be completed to the highest standards.
Step 2:
Low pressure injection of appropriately colour-matched automotive paint directly into the damaged area ensures that the chip is filled from the bottom upwards and that all of the chip is filled to the point of overflowing. Appropriate thinning ensures minimal shrinkage of the paint during drying time but allows for some capillary action to occur during the filling process, this ensures a strong longlasting hold to the edges of the damaged area.
Step 3:
After an appropriate drying time, excess paint (the overflow) is gently removed using the Specialty Final Touch Formula, This formula is the secret ingredient that really sets our system apart form the competition, its properties allow upper layers of paint to be removed without stripping the paint from the chip itself, its gentle formulation also ensures that the colour-match stays true which is particularly important in lighter colours and metallic paints. It also has the added benefit of a polishing action that actually enhances the gloss and finish of the original paint finish.
If Final Touch operators were to work on your vehicle the 5 basic stages we would go through on your vehicle would be:
1) Polish 2) Spray Paint 3) Wipe Paint 4) Carefully Pencil fiddly bits 5) Present back to you, Beautiful
